Best Yh Inverters Deals

Y&H 4000W Hybrid Solar Inverter DC24V 120VAC Pure Sine Wave Output Battery-Free Starting, Built-in 140A MPPT Charger, 6.25" Touch LCD, UPS/Line/Battery Mode, for Off-Grid Home/RV/Energy Storage System

Image of Y&H 4000W Hybrid Solar Inverter DC24V 120VAC Pure Sine Wave Output Battery-Free Starting, Built-in 140A MPPT Charger, 6.25" Touch LCD, UPS/Line/Battery Mode, for Off-Grid Home/RV/Energy Storage System

Product Highlights

  • ✅ 4000W Pure sine Wave Inverter is a new all-in-one hybrid solar inverter charger, Tempered glass top cover design + touch function, one key to restore the default settings. The default mode is Off Grid. You can manually enable On Grid.
  • ✅ 4KW Hybrid Solar Inverter Max.PV Input Power: 5600W, Voltage range: 55-350Vdc, Max. PV Input VOC: 350V DC, Starting voltage >90V;The best working voltage is 55-280V;Max. charge current: 140A. Nominal Input Frequency: 50/60Hz;Output Power: 4000W, surge Capacity: 8000w. fit for 24V Lead-Acid (Seal, AGM,Gel, Flooded) and Lithium battery
  • ✅ Off Grid Solar Inverter have 4 charging modes are optional, i.e. Only Solar, Mains First , Solar First and Mains & Solar hybrid charging;and 3 output modes are available, i.e. Solar First, Mains First and SBU Priority, uninterrupted power supply to meet different application requirements. And compatible to mains voltage or generator power, Auto restart while AC is recovering.
  • ✅ Built-in BMS function.Lithium Battery Activation, has a reactivation feature to awaken a sleeping lithium battery. Inverter work easy to heat, traditional design of 2 cooling fans, Y&H design of 3 fans, better cooling function, improve work efficiency, prolong the life of the inverter.

Y&H 600W Solar Grid Tie Micro Inverter with AC Data Monitoring Display Screen Waterproof IP65 MPPT DC28-50V PV Input AC80-160V Output for 24V 36V Solar Panel

Image of Y&H 600W Solar Grid Tie Micro Inverter with AC Data Monitoring Display Screen Waterproof IP65 MPPT DC28-50V PV Input AC80-160V Output for 24V 36V Solar Panel

Product Highlights

  • ✅ WVC series inverter Using IP65 waterproof streamline design which effectively prevent rainwater on the surface erosion. Microinverters turn the power from your solar panels into usable electricity. Single-phase microinverters are usually used in residential and small commercial environments(Support single-phase or three-phase connection)
  • ✅ We have improved the AC wiring solution. Configure converters for faster installation. Avoid the risk of miswiring the fire, zero and ground wires.Meanwhile, the DC input is designed with MC4 connector to avoid reversing the positive and negative terminals. (Some customers extend the solar panel cable so that the positive and negative polarity is reversed)
  • ✅ Grid Tie Inverter can monitor in real time the power generated by the inverter through the AC digital meter.(Voltage, current, active power, electrical energy, frequency, power factor)No fire risk and electric shock during installation and operation due to low DC voltage(up to 50V) compared with at least 200V from string inverters
  • ✅ Grid Tie Solar Inverter suitable for 2X250W-300W 36V solar panel (Vmp30-39V; Voc36-50V) Vmp = working voltage; Voc = open circuit voltage.Optimized for high powered 60-cell and 72-cell* modules.Each MC4 branch cannot exceed 300W

Y&H 1000W Grid Tie Inverter Power Limiter DC25-60V Solar Input AC110V/240V Auto Switch

Image of Y&H 1000W Grid Tie Inverter Power Limiter DC25-60V Solar Input AC110V/240V Auto Switch

Product Highlights

  • ✅ 【Input Requirements】The Y&H grid tie inverter DC input 22-60V (startup voltage 26V), Voc (solar panel) must not exceed 60V to ensure good output efficiency, Please ensure that the solar panel power is not less than 200W and check the open-circuit voltage to be between 38-60V (Voc).
  • ✅ 【Battery Power Supply】This DC 22-60V grid tie solar inverter can only be powered by 36V/48V batteries, and when using batteries, please use a circuit breaker, The inverter features a battery discharge power mode that can automatically adjust the depth of discharge for the battery bank.
  • ✅ 【MPPT Technology】The inverter utilizes innovative MPPT technology with an efficiency of up to 99% and a peak conversion rate of 80%. It is necessary to use solar panels of the same specifications, and the inverter comes with a limiter sensor, providing only the power required for the load. The controller wiring should not exceed 66 feet.
  • ✅ 【LCD Display】The LCD screen can display daily power generation, total power generation, real-time grid waveform, real-time solar system voltage and current, real-time power, internal temperature, date, and time. To meet higher power usage requirements, this grid-tie inverter can be stacked, for example, using 4 grid-tie inverters stacked equals 1000W, equivalent to 4000W, with no limit on the number of stacked units.

Y&H 3200W Solar Hybrid Inverter DC24V to AC230V,Off-Grid Pure Sine Wave Inverter with 80A MPPT Solar Charger+AC Charger,Max PV 3000W DC55-450V Input,fit for 24V Lead-Acid/Lithium Battery

Image of Y&H 3200W Solar Hybrid Inverter DC24V to AC230V,Off-Grid Pure Sine Wave Inverter with 80A MPPT Solar Charger+AC Charger,Max PV 3000W DC55-450V Input,fit for 24V Lead-Acid/Lithium Battery

Product Highlights

  • ✅ 【Pure sine Wave Inverter】3200W Pure sine Wave Inverter 24V DC to AC 220/230/240V (Single phase/A Hot Leg 230V Output, Can't Output 110V AC), built in 80A Mppt charge controller, is a new all-in-one hybrid solar inverter charger, fit for 24V Lead-Acid (Seal, AGM,Gel, Flooded) and Lithium battery
  • ✅ 【TECHNICAL SPECIFICATIONS】3200VA Hybrid Solar Inverter Max.PV Input Power: 3000W, Voltage range: 55-450Vdc, Max. PV Input VOC: 450V DC, Starting voltage >60V;Recommended PV cable size: 16AWG, Max.charge current: 80A.Nominal Input Frequency: 50/60Hz; Output Power: 3000W, surge Capacity: 6000W.
  • ✅ 【MULTIPLE CHARGING MODES】Off Grid Solar Inverter have 4 charging modes are optional, i.e. Only Solar, Mains Frist , Solar Frist and Mains & Solar hybrid charging;and 3 output modes are available, i.e. Solar Frist, Mains Frist and SBU Priority, uninterrupted power supply to meet different application requirements. And compatible to mains voltage or generator power, Auto restart while AC is recovering.
  • ✅ 【WIDE RANGE OF USES】MPPT Inverter Charger Pure sine Wave 2200W for RV Camping Boat Home Emergency ect.. Can be accessed to a variety of household and office loads, including Oven, rice cooker, lamps, televisions, fans and other AC loads.(Be careful not to install it near the bedroom, the fan will make a sound when the inverter is running.Avoid affecting your rest (expect 50-70 db)

Y&H 1200W Solar Grid Tie Micro Inverter with AC Data Monitoring Display Screen Waterproof IP65 MPPT DC28-50V PV Input AC80-160V Output for 36V Solar Panel

Image of Y&H 1200W Solar Grid Tie Micro Inverter with AC Data Monitoring Display Screen Waterproof IP65 MPPT DC28-50V PV Input AC80-160V Output for 36V Solar Panel

Product Highlights

  • ✅ WVC series inverter Using IP65 waterproof streamline design which effectively prevent rainwater on the surface erosion. Microinverters turn the power from your solar panels into usable electricity. Single-phase microinverters are usually used in residential and small commercial environments(Support single-phase or three-phase connection)
  • ✅ We have improved the AC wiring solution. Configure converters for faster installation. Avoid the risk of miswiring the fire, zero and ground wires.Meanwhile, the DC input is designed with MC4 connector to avoid reversing the positive and negative terminals. (Some customers extend the solar panel cable so that the positive and negative polarity is reversed)
  • ✅ Grid Tie Inverter can monitor in real time the power generated by the inverter through the AC digital meter.(Voltage, current, active power, electrical energy, frequency, power factor)No fire risk and electric shock during installation and operation due to low DC voltage(up to 50V) compared with at least 200V from string inverters
  • ✅ Grid Tie Solar Inverter suitable for 4X250W-300W 36V solar panel (Vmp30-39V; Voc36-50V) Vmp = working voltage; Voc = open circuit voltage.Optimized for high powered 60-cell and 72-cell* modules.Each MC4 branch cannot exceed 300W

Y&H 6.2KW Solar Hybrid Inverter 48V AC220V On/Off-Grid Solar Inverter Built-in MPPT 120A Solar Charger, Two Load Output Power Max PV Power 6500W Input, Supports Batteryless

Image of Y&H 6.2KW Solar Hybrid Inverter 48V AC220V On/Off-Grid Solar Inverter Built-in MPPT 120A Solar Charger, Two Load Output Power Max PV Power 6500W Input, Supports Batteryless

Product Highlights

  • ✅ 【PURE SINE WAVE INVERTER】6200W 48V Off-Grid Solar Inverter Built-in 120A MPPT Charge Controller, Pure Sine Wave Inverter Single-phase output 230VAC, 6.2kw new all-in-one inverter combining functions of inverter, solar charger and battery charger to offer uninterruptible power support in a single package.This inverter supports battery-free operation.
  • ✅ 【TECHNICAL PARAMETERS】120A MPPT Solar Charging Inverter, MAX. PV Array Power: 6500W, Max.PV Open Circuit Voltage: 450Vdc; Starting voltage >90V, MAX. Charging Current:120A, PV Array MPPT Voltage Range: 60~450Vdc; Cold start function(46V).
  • ✅ 【TWO LOAD OUTPUT POWER】Setting range is from 40.0V to 46.0V for 6.2KW model. Increment of each click is 0.1V. When the battery voltage falls below the setting range, the Main OUT port stops working.Only the Second Out port will work. For areas with frequent power outages and loads that can't be blacked out, you can set the battery voltage to 46V. Keep more battery capacity for emergencies.If the battery voltage is higher than 46V, the Main OUT port will continue to work.
  • ✅ 【One Click Restore Default Settings】6.2KW All in One MPPT inverter can restore the system settings by one key in case of setting error, avoiding the machine damage caused by setting error. with battery cold start function(46V) ,and automatic restart while AC is recovering to well protect your system.

Y&H 4200W Hybrid Solar Inverter AC230V to DC12V/24V Dual Voltage Pure Sine Wave Off-Grid Inverter, Built-in 100A MPPT Controller, Max PV Power 4000W Input with BMS /RS485, for Home/RV/Backup Power

Image of Y&H 4200W Hybrid Solar Inverter AC230V to DC12V/24V Dual Voltage Pure Sine Wave Off-Grid Inverter, Built-in 100A MPPT Controller, Max PV Power 4000W Input with BMS /RS485, for Home/RV/Backup Power

Product Highlights

  • ✅ ✅ 【Dual Voltage & High Power】: Y&H SUN-4.2K12V/24V inverter intelligently adapts to 12VDC or 24VDC battery systems, delivering 2300W at 12V and a robust 4200W at 24V. Perfectly suited for diverse power needs in homes, RVs, or off-grid setups.
  • ✅ ✅ 【Advanced MPPT Solar Charging】: Integrated MPPT solar charge controller with a wide 55V-500V operating range and 500Voc open circuit voltage. Maximizes solar energy utilization with 100A maximum charge current, ensuring efficient battery charging and energy independence.
  • ✅ ✅ 【Pure Sine Wave & Versatile AC Input】: Provides a stable and clean 230VAC pure sine wave output, compatible with sensitive electronics and appliances. 3 charging modes support: Solar first,Solar&Utility and Battery & Solar. Supports both mains and generator AC input with selectable voltage ranges (90-280VAC for home appliances, 170-280VAC for PCS).
  • ✅ ✅ 【Comprehensive Protection & Smart Features】: Equipped with overload, over-temperature, and short circuit protection for safe and reliable operation. Features automatic restart, intelligent battery charging, RS485 communication, and optional monitoring for enhanced control and management. You can use inverter as energy storage device without power Grid (Off Grid).Can be accessed to a variety of household and office loads, including refrigerators, lamps, televisions, fans, air conditioning and other loads.

Y&H 2200W Solar Hybrid Inverter DC12V to AC230V,Off-Grid Pure Sine Wave Inverter with 80A MPPT Solar Charger+AC Charger,Max PV 2000W DC55-450V Input,fit for 12V Lead-Acid/Lithium Battery

Image of Y&H 2200W Solar Hybrid Inverter DC12V to AC230V,Off-Grid Pure Sine Wave Inverter with 80A MPPT Solar Charger+AC Charger,Max PV 2000W DC55-450V Input,fit for 12V Lead-Acid/Lithium Battery

Product Highlights

  • ✅ 【Pure sine Wave Inverter】2200W Pure sine Wave Inverter 12V DC to AC 220/230/240V (Single phase/A Hot Leg 230V Output, Can't Output 110V AC), built in 80A Mppt charge controller, is a new all-in-one hybrid solar inverter charger, fit for 12V Lead-Acid (Seal, AGM,Gel, Flooded) and Lithium battery
  • ✅ 【TECHNICAL SPECIFICATIONS】2200VA Hybrid Solar Inverter Max.PV Input Power: 2000W, Voltage range: 55-450Vdc, Max. PV Input VOC: 450V DC, Starting voltage >60V;Recommended PV cable size: 16AWG, Max.charge current: 80A. Nominal Input Frequency: 50/60Hz; Output Power: 1800W, surge Capacity: 3600W.
  • ✅ 【TECHNICAL SPECIFICATIONS】2200VA Hybrid Solar Inverter Max.PV Input Power: 2000W, Voltage range: 55-450Vdc, Max. PV Input VOC: 450V DC, Starting voltage >60V;Recommended PV cable size: 16AWG, Max.charge current: 80A. Nominal Input Frequency: 50/60Hz; Output Power: 1800W, surge Capacity: 3600W.
  • ✅ 【WIDE RANGE OF USES】MPPT Inverter Charger Pure sine Wave 2200W for RV Camping Boat Home Emergency ect.. Can be accessed to a variety of household and office loads, including Oven, rice cooker, lamps, televisions, fans and other AC loads.(Be careful not to install it near the bedroom, the fan will make a sound when the inverter is running.Avoid affecting your rest (expect 50-70 db)

Y&H 3600W Hybrid Solar Inverter DC 24V to AC 110/120V Pure Sine Wave, w/ 120A MPPT Controller, Dual AC Output, Max 4200W PV Input, Lead-Acid/Lithium/Battery-Free Use, for Home Backup, RV, Off-Grid

Image of Y&H 3600W Hybrid Solar Inverter DC 24V to AC 110/120V Pure Sine Wave, w/ 120A MPPT Controller, Dual AC Output, Max 4200W PV Input, Lead-Acid/Lithium/Battery-Free Use, for Home Backup, RV, Off-Grid

Product Highlights

  • ✅ Y&H 3600W On/Off-Grid Solar Hybrid Inverter: This upgraded 3600W solar inverter supports the conversion of DC 24V to AC 110V/120V and outputs pure sine waves. It has a built-in circuit breaker and is a new integrated solar hybrid charging inverter that encompasses solar energy storage, battery charging, and AC sine wave output, providing an uninterrupted power supply.
  • ✅ Technical Parameters: 120A MPPT solar charging inverter, MAX. PV array power: 4200W, Peak power: 7200W, Max DC Voltage: 500VDC; Max AC Input Current:40A; Output Frequency: 50Hz/60Hz; Starting Voltage > 90V, Maximum Charging Current:120A.
  • ✅ LCD Display and Real-time Monitoring: This All-in-One solar inverter features an LCD display and 3 LED indicator lights for dynamic and convenient monitoring of system data and operation status. Intelligent variable speed fan dissipates heat effectively, extending the system's lifespan.
  • ✅ Charging and Output Modes: The solar inverter offers 4 charging modes: only solar, mains supply priority, solar priority, and a combination of mains supply and solar charging. 2 output modes: power bypass and inverter output; continuous power supply caters to diverse application needs.

Y&H 12kW Hybrid Solar Inverter DC 48V to AC120V/240V, UL1741, Split Phase Output, with 220A MPPT 99.9% Efficiency, Parallel Support 6 Units, for Battery-Free Operation and Lead-Acid/Lithium Battery

Image of Y&H 12kW Hybrid Solar Inverter DC 48V to AC120V/240V, UL1741, Split Phase Output, with 220A MPPT 99.9% Efficiency, Parallel Support 6 Units, for Battery-Free Operation and Lead-Acid/Lithium Battery

Product Highlights

  • ✅ Y&H 12kW All-in-one solar charge inverter ​– Combines solar power, battery storage, and grid electricity for uninterrupted power supply. Supports ​120V/240V split-phase output​ (L1-L2: 208V/240V, L1-N/L2-N: 120V), 500V max PV input​ with ​dual MPPT trackers (99.9% efficiency)​​ ideal for home and off-grid applications. ​
  • ✅ with Lead-Acid & Lithium Batteries​ – Supports ​GEL/SLD/FLD lead-acid​ and ​LFP/NCM lithium batteries​ (BMS communication via RS485/CAN). ​4 charging modes: Solar Only, Utility Priority, Solar Priority, and Hybrid (PV + Grid). ​220A max charging current​ for fast battery replenishment.
  • ✅ Parallel Operation (Up to 6 Units)​​ – Expandable system for higher power needs. ​Anti-feed-in CT detection​ ensures no backflow to the grid (self-consumption mode). ​Time-based charging/discharging​ for energy cost optimization. ​Wi-F i/RS485 monitoring​ for remote control via app.
  • ✅ UL1741 Certified​ – Meets US safety standards. ​Full protection suite: Overload, short-circuit, over-temperature, and reverse polarity protection. ​Low battery recovery (52V)​​ and ​over-discharge cutoff (42V)​​ to extend battery life. ​Pure sine wave output​ for sensitive electronics.